|
|
Post by wkboardr on Nov 10, 2015 18:10:16 GMT -6
Hey! I just wanted to let everyone know that I have finally secured all the parts for the build and just know that some arent pictured, but I am going to provide a complete list once it is complete. The reason for the build is to create a comfortable day trip bike that I can ride spirited through the mountains, but also have a aggressive bike for tracks days. I know that not everyone is going to agree or like with what i do, but I am building this specifically for me  I am going to start by showing the pic of what is to come and after everything is complete, I will show the finished bike with pics and list all the details. Thanks for your patience as I work through the build during my crazy work season. Bobby goo.gl/photos/GTvydDRqg8xiVCSLA |
|
|
|
Post by scooter1640 on Nov 10, 2015 19:31:54 GMT -6
Looks like you got some good stuff in the works!
|
|
|
|
Post by 8000rpm on Nov 11, 2015 10:56:25 GMT -6
Details on the brembo master and the akra headers please?? Do the headers adapt to any slip on?
|
|
|
|
Post by swedishsteel on Nov 11, 2015 15:02:32 GMT -6
Sweeet! Will follow!
|
|
|
|
Post by AshesOfAnother on Nov 11, 2015 18:08:38 GMT -6
Followed!
|
|
|
|
Post by wkboardr on Nov 11, 2015 20:30:31 GMT -6
Details on the brembo master and the akra headers please?? Do the headers adapt to any slip on? The Brembe master is a 19 x18, will link up vis braided lines to stock calipers and Vesrah pads. I will be posting an update on the brakes once its complete. The akropovic header pipe was purchased with the slip on and considering the slip on fits both the stock pipe and the aftermarket, I would assume it would fit any after market pipe ment to fit the stock application. |
|
|
|
Post by 8000rpm on Nov 12, 2015 7:03:16 GMT -6
Thanks for pioneering the headers and master cylinder, man! You're probably the first to do both. I was looking into upgrading to a m/c with more bore but I haven't figured out what to do with the brake light switch that's wired to our assembly. What're you doing for yours? And what a sight to see if I got these headers- akra headers and yosh slip on.. lol  |
|
|
|
Post by wkboardr on Nov 12, 2015 17:27:05 GMT -6
Well got some bad news today.....apparently aura just realized that they mislabeled the header. It was meant for a gsxr not ours and they said to send it back for a refund. They don't even have any plans for making a header :- (
|
|
|
|
Post by AshesOfAnother on Nov 12, 2015 18:59:25 GMT -6
Damn it!
|
|
|
|
Post by 8000rpm on Nov 12, 2015 22:02:25 GMT -6
Damn... too good to be true  You can always get a full arrow exhaust from Europe though. Full exhausts do exist, it's just how far you're willing to go to get one. |
|
|
|
Post by AshesOfAnother on Nov 12, 2015 22:29:37 GMT -6
I think I'll have a guy I know pull the cat.
|
|
|
|
Post by scooter1640 on Nov 13, 2015 21:09:06 GMT -6
Arrow does have a header (collector)
And mid pipe...
I wonder if a Yosh pipe (silencer/muffler) bolts on? They do a mid pipe that a factory can slips on... Would it be too far off to assume that the R11 would fit on that?
|
|
|
|
Post by scooter1640 on Nov 13, 2015 21:10:13 GMT -6
Well got some bad news today.....apparently aura just realized that they mislabeled the header. It was meant for a gsxr not ours and they said to send it back for a refund. They don't even have any plans for making a header :- ( I saw where Revzilla pulled there's off the site too... |
|
|
|
Post by wkboardr on Nov 15, 2015 15:31:38 GMT -6
Damn... too good to be true You can always get a full arrow exhaust from Europe though. Full exhausts do exist, it's just how far you're willing to go to get one. I waited 2 months for the akro, may consider it. First I am taking the gsxr header in with the bike to see if they can be used at all. |
|
|
|
Post by AshesOfAnother on Nov 15, 2015 19:18:24 GMT -6
How much larger is the diameter of the header pipes?
|
|
