Removing the Bar End inserts

[s750]

Hello,

I am having a tough time trying to remove the bar end inserts on my 2018 GSX-S750. I want to install bar end mirrors that do not fit over the factory bar ends. I have removed the bar end weights but I am not being able to remove the insert that is inside the handlebar (where the bar end weight screws into). 

I have tried wd-40 and also putting the screw half-way through the insert and hammering the screw, but this has not helped. I would greatly appreciate if the experts here can weigh-in with their suggestions and tips. 

Attachments:

[hansum-mane]

You are done. Screw your mirrors in using M6 bolts. Or get the replacement barends from Rhino Moto. They have a model with a step down for clamping on bar end mirrors.

[AshesOfAnother]

Those inserts are not removable. My mirrors came with their own adapters that screwed into the insert.

[s750]

Thank you very much for the replies. Rhino Moto bar ends are on the way!

[hansum-mane]

They are quite nice and have sliders. The only drawback is limited movement of the mirror arms because of the slider sticking out.

[s750]

Rhino Moto bar ends were delivered today! I will post pictures in this thread once I put them on.

[s750]

The Bike Master mirrors did not fit on the Rhino Moto bar ends. So I bought cheap bar end mirrors from amazon and used the bar ends that came with it. Thanks everyone for the help!

[mrstamp80]

Glad you got it worked out, Looks good.