Day 7 | Handmade Windscreen | Trimmed, Test Fit and Patched

[sstressfl]

With the fiberglass "sandwich" complete, I was able to use a cut off wheel to trim back the fiberglass edges... in the excitement, I cut thru one of the mounting tabs! But there was enough of the tab remaining to be salvaged. It was satisfying to see a rough test fit on the motorcycle. It looked awesome, even in rough! I found a large bubble in the fiberglass so I cut it out and prepped the area to be repaired with a small fiberglass patch. Thankful for the freakish warm-up that allowed me to work outside and avoid filling the house with toxic fumes.

youtu.be/9KE72bj-aM4