|
Post by bubbagsxs750 on Aug 29, 2017 21:28:47 GMT -6
Hey guys so I think I kind of messed up like the thread of where the screw goes to hold the top part of the headlight casing or when you get like the GIVI windscreen you take the screws out put the little extensions and put the longer screws to hold the wind screen and headlight case. Long story short I was trying to put the givi windscreen and for some reason the longer screw would get really tight and not go all the way in. Only one side would work and I even try to put them slowly at the same time evenly. Until like after an hr I got so frustrated that I took a drill and forced it. The screw went all the way down but just kept spinning. Decided to just take the windscreen off send it back. Was able to get the original screw to some what stay tight. Now I'm scared to remove the headlight casing for anything like if I wanted to change the turn signals or headlight bulbs incase the screw won't catch again. So went thought the parts like and wanted to know if the bracket thing in the picture is something that comes off and is a part I can replace or is it something that's like welded on and they would need to take like a piece of the frame off? Thanks! Attachments:
|
|