|
Post by madjohn on Aug 18, 2017 10:44:12 GMT -6
I've just ordered some Evotech crash bungs from there web site. Can any one tell me the torque settings i should be using to torque them up.
Ta Madjohn.
|
|
|
Post by AshesOfAnother on Aug 18, 2017 15:48:20 GMT -6
If you are talking about the swing arm bins, it all depends on the hardware they come with. Pretty sure they are M8 hardware. If they send 5.8 it's 15.3 nm if they are 8.8 then 24.5 nm will get you where you need to be. A couple drops of blue loctite will keep them there as well. Take care with the bobbins while riding with a passenger. They will hit your can if the spring is set to low.
|
|
|
Post by madjohn on Aug 19, 2017 3:30:59 GMT -6
Sorry it's not the bobbins for the swing arm but the frame sliders.
|
|