|
Post by ethereal on Aug 4, 2017 5:38:57 GMT -6
Been doing a lot of track days on my bike and was having issues rolling on full throttle without re positioning my hand. My wrist would get kink and I would have to almost let go to move my hand to where I could get more twist. I was going to do a full write up/DIY how to but the link( LINK IS AT BOTTOM OF POST) I am providing covered almost all. I have to sand it down a bit more then they mention to get it to fit inside the housing(Will be changing mine out for a full race on next year) My initial thoughts doing this was that my roll on would get let feel in the corners and be more choppy. This has not been the case and has made the bike easier to ride and smoother with less input from me. This mod cost me $1 CDN and about 1hr of my time. This install could be done faster but I took the time to open everything up right to the throttle body. Opening up to the throttle body was not needed but I wanted to make sure it was 100% good to go. www.kawiforums.com/2003-2004-zx-6r/118250-quick-throttle-pvc.html Cheers guys enjoy
|
|