Post by gsr on Apr 30, 2017 18:59:23 GMT -6
Take your time. Read the instructions. Watch torque values if you normally do. Locktite.
Suzuki made this an easy OEM part install.
Did the Left side first...which is probably best as is easiest.
Fit grommets and the mount plate to left side piece.
Then fit the bracket that attaches directly to bike.
Then fit your prepared left side piece to bike.
Right side.
Very similar. Fit grommets and mount bracket to right side piece. Also fit the new hose clamp to said piece per pic (direction is important) provided in instructions. This clamp is gonna replace the stock hose clamp. More on that below.
Then fit the bracket that attaches directly to bike.
Then fit the hose extenders to existing hoses on bike.
Then...the instructions don't tell you to remove the existing hose clamp (similar to the one you've already fitted to your new right side bit). Probably not so much that they forgot...more likely liability..
But you have to remove that stock clamp so you have a hole for your screw to go through and into the mounting bracket that you installed onto the right bit earlier.
Mount side piece to bike loosely, then blindly attached hose clamp to newly extended hoses. Tighten everything up. Done!
Like this mod a lot.
Does a good job of cleaning up the underside without going full underbelly at half or less of the cost.
Suzuki description: Under cowling
Part number:94400-08810
First saw this mod in this review ultimatemotorcycling.com/2015/07/03/2015-suzuki-gsx-s750-review-fun-factor-redefined/
Picked these up on Amazon for 60.00 to the door. Amazon photo showed gloss black finish. Product received was satin black which actually works better for the matte 2015 GSX-S750.