|
|
Post by prescottjay on Feb 14, 2017 8:16:21 GMT -6
To adjust the chain, the manual says to adjust 2 bolts at the end of the swing arm. I only see 1. Is that the adjuster?
|
|
|
|
Post by AshesOfAnother on Feb 14, 2017 8:20:59 GMT -6
First thing you need is a pit stand. I use this one.  It's nothing special but it gets the job done. Next you need a set of spools or 8mm bolts to put into you arm.  Alright, you see that big nut? Put a wrench in both sides and loosen it, but don't remove it, just loose enough to move. The bolts that adjust the rear axles position are in those gray inserts. I don't have a photo of them at the moment, but will get one asap.   |
|
|
|
Post by prescottjay on Feb 14, 2017 9:08:21 GMT -6
I can be pretty dense sometimes. Due to your pic I just realized that the adjusters are on both sides of the tire. Thank you
|
|
|
|
Post by AshesOfAnother on Feb 14, 2017 9:10:47 GMT -6
No problem, I edited the post above with the pages from the manual. Have fun!
|
|
|
|
Post by hansum-mane on Apr 8, 2017 19:55:17 GMT -6
My chain is getting awfully loose. I'm guessing you have to remove the T rex swingarm protector to loosen the axle nuts?
|
|
|
|
Post by AshesOfAnother on Apr 9, 2017 0:35:18 GMT -6
Yep, don't forget to loosen the set screw!! I may know a guy that had to buy another one, because he forgot....
|
|
