|
Post by suzukino on Apr 2, 2017 12:39:24 GMT -6
Hei, yea I will snap a picture tomorrow. And if there is no chance to get it on top, does anyone has the damper under the headlight? Because I cheked the web that sells the KIT thaht supose to fit, but they just write that the KIT includes everything to fit the damper, but can I trust them? I dont know...
|
|
|
Post by suzukino on Apr 3, 2017 10:49:44 GMT -6
The aliuminium peace sticking from the bottom of the ignition.
|
|
|
Post by AshesOfAnother on Apr 7, 2017 14:42:26 GMT -6
I thought that's what you were talking about, and am surprised it's in your way. Sorry bud, I can't help on this one. Have you pm'd speedy?
|
|
|
Post by suzukino on Apr 8, 2017 3:08:33 GMT -6
Yea I wrote to him, waiting for answer. I believe all gsr bikes has same lock, so really intresting how speedy got arround that one
|
|
|
Post by speedymax on Apr 15, 2017 14:59:30 GMT -6
Hi Suzukino, I apologise for the long delay in replying. I sent you a message, but for anyone else that is interested the mount connects to the tank cushion mount points. You don't need to remove the tank just the black plastic surround at the front of the tank that covers the ignition and you will then see the mount points. The design of the bracket means it goes around.
Dimotiv also have kits for other dampeners for the GSR750 - www.dmv.com.tw/html/front/bin/ptlist.phtml?Category=355197Save
|
|
|
Post by suzukino on Apr 16, 2017 9:14:41 GMT -6
So I understand that the mounting points is same as a fuel tank, and the bracket itself goes by side of the steering lock yes?
|
|
|
Post by speedymax on Apr 17, 2017 14:20:13 GMT -6
I'll take a photo of it fitted from an angle to show hopefully what you need. I can confirm that I did not need to do any additional modifications to get it to fit which took me no more than 15mins.
|
|
|
Post by suzukino on Apr 17, 2017 22:56:16 GMT -6
I know I sound paranoic, but I would be really thankfull for a picture. It's just that here in norway I will have to pay custom charges plus post and if it will not fit the 'return' procedure takes forever... Thank you very much for helping.
|
|
|
Post by speedymax on Apr 18, 2017 9:32:35 GMT -6
I know I sound paranoic, but I would be really thankfull for a picture. It's just that here in norway I will have to pay custom charges plus post and if it will not fit the 'return' procedure takes forever... Thank you very much for helping. No problem, I had charges to pay as well so I know what you mean. Here you are you can see it sits above the steering lock. Looking at it again I remember I had to cut a rectangular notch in my nice new carbon fibre cover to allow it to sit nice and flat. Apart from that the only things I did do was after some use I added a little thread lock on the main bolt going through the pillar that connects to the dampener, as I found it was working it way loose after riding. So far its been fine. Save
|
|
|
Post by suzukino on Apr 18, 2017 12:27:10 GMT -6
Man, you are a STAR! Thank you for help
|
|
|
Post by speedymax on Apr 23, 2017 9:27:54 GMT -6
I was doing some other wprk on the bike and took the opportunity to take a pic of the bracket without all the other stuff around it.
|
|