|
Post by bleonard on Jun 5, 2019 7:25:39 GMT -6
This is my first bike so it may be normal. Under harder acceleration it sounds like the speedo or front plastic is rattling. Is this normal?
|
|
|
Post by sp3ak on Jun 5, 2019 8:25:25 GMT -6
There have been a few folks that have had odd buzzing at various RPM's. I have a 2015 and I had to add some extra rubber backing to the trim piece that goes around the key slot, that helped a bit.
|
|
|
Post by bleonard on Jun 5, 2019 9:18:31 GMT -6
There have been a few folks that have had odd buzzing at various RPM's. I have a 2015 and I had to add some extra rubber backing to the trim piece that goes around the key slot, that helped a bit. Ok I'll try that. I'm changing my headlight this weekend so I'll check all the screws to.
|
|
|
Post by keenan121 on Jun 9, 2019 23:51:56 GMT -6
bleonard youtu.be/qQl9vxuXYAo for your headlight. sorry for the bad quality, but should help. sp3ak-do you have an example of the rubber you did?
|
|
|
Post by bleonard on Jun 10, 2019 7:24:08 GMT -6
I checked everything around my headlight it's all tight. The led bulbs are so much brighter than stock. Gonna take the ignition shroud off and see what I can figure out
|
|
|
Post by bleonard on Jun 11, 2019 4:50:29 GMT -6
Just an update. Added some foam behind the small ignition shroud. I had to remove it from the larger piece. Seems to have fixed my issue!
|
|
|
Post by keenan121 on Jun 13, 2019 18:49:03 GMT -6
did you put foam on the inside of it? like a weather strip thing or?
|
|
|
Post by bleonard on Jun 18, 2019 11:05:03 GMT -6
I had some foam tape in my tool box. I took the 2 bolts out of the key surround and put some there. It seems to have fixed it
|
|