|
Post by Dave545 on Apr 14, 2016 20:30:34 GMT -6
Hey guys just wanted to give you some info. I had my bike tuned at xtreme machines in NJ today by Tom. Not sure what base HP was because I had the slip on removed, the exhaust servo deleted,a K&N filter installed and the power commander 5 installed prior to base run. However the final number was 109.59 at 10,770 rpm and 58.91 torque at 8,810 rpm those numbers being at the wheel. I think these are great numbers from the projected factory numbers. The bike definitely pulled much harder all the way through the rpm range. Will try to attach photo of dyno after the website let's me sign up lol.
|
|
|
Post by wkboardr on Apr 15, 2016 10:26:59 GMT -6
Hey guys just wanted to give you some info. I had my bike tuned at xtreme machines in NJ today by Tom. Not sure what base HP was because I had the slip on removed, the exhaust servo deleted,a K&N filter installed and the power commander 5 installed prior to base run. However the final number was 109.59 at 10,770 rpm and 58.91 torque at 8,810 rpm those numbers being at the wheel. I think these are great numbers from the projected factory numbers. The bike definitely pulled much harder all the way through the rpm range. Will try to attach photo of dyno after the website let's me sign up lol. I believe the base hp is 97hp at the rear wheel.
|
|
|
Post by madman on Jan 6, 2017 19:35:02 GMT -6
Canadian model is 106hp at the rear wheel.
|
|
|
Post by chipwood67 on Jan 7, 2017 9:47:32 GMT -6
i was thinking getting the exhaust servo deleted too any benefits from this as i here it there just effects the noise level and emissions..i was told it just a myth about the exhaust valve needed for back pressure and suzuki also stating the valve will help low down torque!.. this is what i was looking at not bad priced either.. www.healtech-electronics.com/products/ese/check this out to.. www.healtech-electronics.com/products/fit/
|
|
|
Post by AshesOfAnother on Jan 7, 2017 13:42:22 GMT -6
It's the colder air up there, more dense! 😁
|
|
|
Post by keenan121 on Jan 7, 2017 14:41:43 GMT -6
chipwood67 I have the smart moto version. no f1 light and you can cut the servo cables and take the entire servo unit out. its quite nice.
|
|
|
Post by Phil gsxs750 on Sept 23, 2017 15:11:59 GMT -6
Hey guys just wanted to give you some info. I had my bike tuned at xtreme machines in NJ today by Tom. Not sure what base HP was because I had the slip on removed, the exhaust servo deleted,a K&N filter installed and the power commander 5 installed prior to base run. However the final number was 109.59 at 10,770 rpm and 58.91 torque at 8,810 rpm those numbers being at the wheel. I think these are great numbers from the projected factory numbers. The bike definitely pulled much harder all the way through the rpm range. Will try to attach photo of dyno after the website let's me sign up lol.
|
|
|
Post by chaosinception on Sept 24, 2017 13:19:19 GMT -6
It's the colder air up there, more dense! 😁
|
|
|
Post by Zach on Dec 14, 2017 14:54:36 GMT -6
Hey.. I have a 2015 Suzuki gsxs 750 too, and I was trying to find a full exhaust system when I stumbled upon deleting the exhaust servo .. did this improve your bikes performance? And can the settings be reset back to default?
|
|
|
Post by jeffc12566 on Dec 17, 2017 11:23:41 GMT -6
Hey.. I have a 2015 Suzuki gsxs 750 too, and I was trying to find a full exhaust system when I stumbled upon deleting the exhaust servo .. did this improve your bikes performance? And can the settings be reset back to default? Zach, improvement other then revving quicker and the tone being a little deeper down low was a smoother engine. Use a Servo Buddy or one of the other since it completes the circuit and keeps the FI light off.
|
|
|
Post by sp3ak on Dec 19, 2017 13:24:22 GMT -6
Friend did the servo mod on his stock 2016 and he said it made little to no difference. Could depend on where you are (temperature/elevation) and other supporting mods on the bike. On a completely stock bike I doubt you'll notice too much.
|
|
|
Post by AshesOfAnother on Dec 20, 2017 21:53:20 GMT -6
The bike feels smoother / consistent. It's not an expensive mod and totally reversible. That's the best way I can describe it.
|
|