|
|
Post by bigpopa71 on Mar 22, 2016 11:36:54 GMT -6
To break up the black I threw on some rim decals. Im still waiting for the front outer rim kit as it is back ordered from Suzuki until April 9th. I could have gotten red for the front but yellow will look much better |
|
|
|
Post by bigpopa71 on Mar 22, 2016 11:42:50 GMT -6
I got an email today saying my Arrow header ships from Italy tomorrow. I also have an appointment with Livengood motorsports to do the airbox mod, velocity stacks, flash and tune in July. And new bar ends and mirrors are on the way. My next mod towards the end of the season will be the brakes. I read some good info in an earlier post for upgrading. Here she is to date. I'm loving this bike. Once I get the header on and the stock unit, servo and cat are gone I should be close to 40 pounds in weight savings Attachments:
|
|
|
|
Post by bigpopa71 on Mar 22, 2016 11:43:48 GMT -6
My Rock Star Build Attachments:
|
|
|
|
Post by wkboardr on Mar 22, 2016 11:49:24 GMT -6
Looks awesome!!! Where did you find rearsets that fit? Before you decided to powdercoat?
|
|
|
|
Post by bigpopa71 on Mar 22, 2016 11:51:40 GMT -6
Looks awesome!!! Where did you find rearsets that fit? Before you decided to powdercoat? Thanks! Sato racing has them. That's where I also got the front axle and frame sliders. The rear sets are $495 |
|
|
|
Post by dothedew on Mar 22, 2016 18:01:14 GMT -6
Where did you get the rider pegs I've been looking, I was just about to pull the trigger on a gsxr set hoping they would fit before I saw your post.
Any info is much appreciated.
|
|
|
|
Post by bigpopa71 on Mar 22, 2016 20:37:32 GMT -6
Where did you get the rider pegs I've been looking, I was just about to pull the trigger on a gsxr set hoping they would fit before I saw your post. Any info is much appreciated. I ordered them out of a catalog at the dealer. They were $40. At the time I didnt know the stock pegs were OEM Hayabusa pegs but when I went to the dealer they told me its the same part number so I ordered them right there. Had I known already I would have jumped on Ebay and found some quick |
|
|
|
Post by bigpopa71 on Mar 22, 2016 22:58:15 GMT -6
Where did you get the rider pegs I've been looking, I was just about to pull the trigger on a gsxr set hoping they would fit before I saw your post. Any info is much appreciated. I ordered them out of a catalog at the dealer. They were $40. At the time I didnt know the stock pegs were OEM Hayabusa pegs but when I went to the dealer they told me its the same part number so I ordered them right there. Had I known already I would have jumped on Ebay and found some quick Here is the website of the rider pegs I have installed www.psr-usa.com/ |
|
|
|
Post by AshesOfAnother on Mar 22, 2016 22:58:33 GMT -6
Great Job!!
|
|
|
|
Post by bigpopa71 on Mar 22, 2016 23:07:02 GMT -6
Thank you sir! I still have a few things left to do but I think she's ready ready to go. I'm more than happy with our GSX-S750 |
|
|
|
Post by AshesOfAnother on Mar 22, 2016 23:10:15 GMT -6
Did I see stars on your grips? I've been looking at a set of the reflective rim decals, where did you pick then up? When you get a chance you should through a sound clip up. The bike looks great man!
|
|
|
|
Post by bigpopa71 on Mar 22, 2016 23:17:23 GMT -6
Did I see stars on your grips? I've been looking at a set of the reflective rim decals, where did you pick then up? When you get a chance you should through a sound clip up. The bike looks great man! Those are Blister busters with the Rockstar energy logos on them. They cost like $5 bucks a pack and look real cool with the Rock star tank pad. I actually have 4 different kinds but these are the only ones I have used so far You can get the rim decals at www.stickmanvinyls.com/ and type in LETSBUYMORE to get a 15% discount. The MGP growler exhaust is pretty aggressive. It sounds flat out nasty. I can do that! Let me figure it out tomorrow |
|
|
|
Post by bigpopa71 on Mar 22, 2016 23:23:55 GMT -6
Did I see stars on your grips? I've been looking at a set of the reflective rim decals, where did you pick then up? When you get a chance you should through a sound clip up. The bike looks great man! Those are Blister busters with the Rockstar energy logos on them. They cost like $5 bucks a pack and look real cool with the Rock star tank tank pad. I actually have 4 different kinds but these are the only ones I have used so far You can get the rim decals at stickmanvinyls.com and type in LETSBUYMORE to get a 15% discount. The MGP growler exhaust is pretty aggressive. It sounds flat out nasty. I can do that! Let me figure it out tomorrow And let me add that I purchased 2 sets of stickers for my wheels. Each set includes 2 for the front and 2 for the back. It looks better when you have a set on the top and one on the bottom of each wheel. They even recommend that when you order them. |
|
|
|
Post by bigpopa71 on Mar 23, 2016 8:34:52 GMT -6
Before and after at the present moment! Attachments:
|
|
|
|
Post by bigpopa71 on Mar 23, 2016 12:46:54 GMT -6
Here are some additional grip Donuts I have laying around. My Renthal Bar ends came in today and were waiting at my door when I got went home for lunch. It only made sense for me to put them on right there  |
|
