|
Post by sstressfl on Apr 30, 2018 5:28:12 GMT -6
Long legs? Adding adjustable foot pegs can make riding so much more comfy. With limited options I thought I'd give the slingshot racing pegs a try. youtu.be/EkQ928Ej0M4
|
|
|
Post by hansum-mane on Apr 30, 2018 12:10:01 GMT -6
So now for the Satos?
|
|
|
Post by sstressfl on Apr 30, 2018 12:22:43 GMT -6
They are soooo pretty!! But they only go down and back.... I am looking for about a 30mm drop :/
|
|
|
Post by sstressfl on Apr 30, 2018 12:29:44 GMT -6
They are soooo pretty!! But they only go down and back.... I am looking for about a 30mm drop :/ This would be ideal if only it fit the gsxs750. 10 ADJUSTABLE POSITIONS min 30mm Down 5mm Back max 40mm Down 25mm Back source: www.satoracing.com/rearsetshayabusa_drag.htm
|
|
|
Post by hansum-mane on Apr 30, 2018 14:42:36 GMT -6
|
|
|
Post by prescottjay on May 15, 2018 10:40:20 GMT -6
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 16, 2018 10:35:34 GMT -6
Those look nice I’m thinking of getting the arashi rearsets but From what I have read adjusting the rearsets as close as possible to stock position you still gain a 1 inch clearance up and a 1-1/2 half clearance back. So I’m afraid it might be uncomfortable.. Anyone has experience with the arashi rearsets.
|
|
|
Post by thornhill16 on May 24, 2018 11:57:44 GMT -6
I had some off brand ones 30mm drop two issues I had were, number one the vibes were terrible over 6k and they keep dragging the ground it was also awkward getting to the rear brake even with it adjusted down pretty low I went back to stock and actually felt more comfortable than with the lower pegs I’m 6ft 2 by the way
|
|
|
Post by sstressfl on May 24, 2018 13:56:02 GMT -6
thornhill16 I'm sticking with stock too. Perhaps a more supportive seat that doesn't collapse after 30 mins of riding could be a solution?
|
|
|
Post by thornhill16 on May 24, 2018 14:19:46 GMT -6
thornhill16 I'm sticking with stock too. Perhaps a more supportive seat that doesn't collapse after 30 mins of riding could be a solution? Yea I have a Shad and it works really well for me the Shad comes as a kit with the pillion and the pillon was so big it poked me in the back so I removed it and only use it when the wife is riding
|
|
|
Post by r3dster on Jun 17, 2018 19:16:30 GMT -6
Any idea if rearsets from any other bike models would fit on ours?
|
|
|
Post by custnam on Jun 18, 2018 7:27:31 GMT -6
Ive been looking into options for lower pegs on my 2018 and keep running into the same issue. When you use the lowering links it makes the pegs stick out further than stock so you have the twist your ankle inward to reach the clutch and brake levers, which is very uncomfortable and not practical. The other option I saw was some Valter Moto rearsets that have multiple mounting options, but they are about $400.
|
|