Post by sp3ak on Jan 1, 2018 14:39:52 GMT -6
Just thought I'd share some pictures, links, and thoughts of the LED turn signals I chose for my 2015 GSXS.
LED Signals: smile.amazon.com/gp/product/B073M2YWGR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Turn Signal Relay: smile.amazon.com/gp/product/B003UN4FXW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
*I found this relay from searching the factory relay part number which is: 38610-03F00 - See this site: www.suzukipartshouse.com/oemparts/a/suz/5594290a87a8661220ea8a86/turnsignal-lamp
Comparison to stock:
Yup plenty bright enough:
All wired up for a clean install on the bike:
And of course a test ride to make sure they work
So far so good! I had hyper flash at first as I didn't have the relay installed but I just put it on and they are blinking at the normal rate. Woohoo! I really love how they look, they match the bike much better and go perfectly with our LED tail light.
Just a couple random quick notes as I wasn't intending to do a full guide on these:
Sorry I didn't write up more specifics, if you have a question let me know. Otherwise, enjoy ditching your stock signals!
LED Signals: smile.amazon.com/gp/product/B073M2YWGR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Turn Signal Relay: smile.amazon.com/gp/product/B003UN4FXW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
*I found this relay from searching the factory relay part number which is: 38610-03F00 - See this site: www.suzukipartshouse.com/oemparts/a/suz/5594290a87a8661220ea8a86/turnsignal-lamp
Comparison to stock:
Yup plenty bright enough:
All wired up for a clean install on the bike:
And of course a test ride to make sure they work
So far so good! I had hyper flash at first as I didn't have the relay installed but I just put it on and they are blinking at the normal rate. Woohoo! I really love how they look, they match the bike much better and go perfectly with our LED tail light.
Just a couple random quick notes as I wasn't intending to do a full guide on these:
- On the bike the gray connectors are for the left turn signals (front and rear) and the black connectors are for the right
- The black wire with a white tracer is GROUND on the factory connector. This is important as LED's will only work when wired up correctly vs incandescent which will light up no matter which way you wire them.
- The side stand relay is located just in front of the batter and under the base of the gas tank.
- You can access the relay by removing the front seat and taking off the left plastic panel. You can reach your hand up in front of the rear peg bar and above the chain. With the seat off you'll see the top of the relay.
- Slide the relay and connector forward off the plastic mount (the rubber grommet may or may not come off with it, no big deal), then you can easily switch out the relays and reinstall.
Sorry I didn't write up more specifics, if you have a question let me know. Otherwise, enjoy ditching your stock signals!