|
|
Post by Leigh on Oct 7, 2017 12:17:41 GMT -6
I have a brand new 2018 Suzuki GSX S750Z and i was changing cleaning and lubing up the chain when i let the battery die. Stupid I know. Now im trying to pop the panels off to access the seat screws. The bolts on the panels will not loosen. Anybody else experienced this issue? Any help will be greatly apprciated.
|
|
|
|
Post by mrstamp80 on Oct 7, 2017 17:24:20 GMT -6
Not sure on the 18 model, maybe ethereal can comment he will know.
|
|
|
|
Post by grantshaw on Oct 8, 2017 14:04:35 GMT -6
There is an Allen key on the black plastic panel on both sides, undo that and then there are 3 push gromits holding it on.
Then when the panel comes off you will see another Allen key each side of the side which is holding the seat on.
Grant.
|
|
|
|
Post by grantshaw on Oct 8, 2017 14:08:53 GMT -6
 Undo the bolts in red (one each side), pull off the plastic panel and then the bolts for the seat are under the panel where I have circled in green 👍🏼 |
|
|
|
Post by Leigh on Oct 8, 2017 21:55:03 GMT -6
Thanks for the replies guys. Grantshaw, I tried using the allen keys provided in the tool kit but the bolts were installed too tight from the factory and the allen keys were not giving me enough leverage. I had to purchase a separate allen key with a lever to give me the leverage. Thanks for the pictures anyway and drive safe!
|
|
|
|
Post by Stan on Nov 17, 2018 16:49:55 GMT -6
Don’t push in the grommets forward of the Allen screw you have to take off to get the plastic off I just did that and lost the center button inside the frame.
|
|
