|
|
Post by AshesOfAnother on May 21, 2017 3:00:54 GMT -6
|
|
|
|
Post by sstressfl on Jun 4, 2017 16:52:04 GMT -6
Just ordered mine tonight! Your video has accelerated my learning. Thank you! I'm so ready to do this. Every bike that I've seen online that has removed the exhaust servo runs smoother and revs much quicker. I was even more convinced about doing this when I read that the primary changes to increase HP on the new 2017 GSXS included larger intake opening and a new exhaust without the servo valve. I'm in! I'll post a video afterward  |
|
|
|
Post by AshesOfAnother on Jun 4, 2017 18:54:17 GMT -6
You will not regret it!
|
|
|
|
Post by sstressfl on Jun 5, 2017 8:39:45 GMT -6
|
|
|
|
Post by AshesOfAnother on Jun 5, 2017 9:09:10 GMT -6
Nope just a sweet slip on and now this.
|
|
|
|
Post by sstressfl on Jun 5, 2017 11:19:08 GMT -6
So cool. Curious to see how far the stock tune can flex. Your bike sure sounded good!
|
|
|
|
Post by AshesOfAnother on Jun 5, 2017 11:58:16 GMT -6
All last week I tried getting a good sound clip while riding. I'll get one without wind soon.
|
|
|
|
Post by sonicmoto on Jul 27, 2017 22:59:43 GMT -6
servo bypass module ordered, hoping to get that servo out soon.
|
|
|
|
Post by AshesOfAnother on Jul 27, 2017 23:01:04 GMT -6
You will not regret it
|
|
|
|
Post by tylerwilliamson on Jul 31, 2017 21:54:36 GMT -6
What exactly does this do? Does the bike perform better?
|
|
|
|
Post by AshesOfAnother on Jul 31, 2017 22:02:22 GMT -6
It tricks the computer into thinking the exhaust servo is there and functioning correctly. This allows you to remove the servo. When the servo cables are disconnected from the valve it springs into the open position.
The 2018 version of our bike has eliminated this from it's exhaust. I have not been able to dyno my bike due to the unstable weather we've had in my area. I will tell you the bike is more responsive and is more enjoyable to ride.
|
|
|
|
Post by bubbagsxs750 on Jan 2, 2018 21:55:04 GMT -6
If you take the bike to get a full exhaust most likely they will add at Servo Buddy module right? Just asking because if they are I rather just do it myself to cut the cost. Let them deal with just adding the headers and stuff. |
|
|
|
Post by AshesOfAnother on Jan 2, 2018 21:57:24 GMT -6
They would need to do something to get past it in the ecu.
|
|
|
|
Post by sonicmoto on Jan 11, 2018 11:13:08 GMT -6
I found the bike to have a slight increase in responsiveness when doing this mod. The servo eliminator is for sure needed to Trick the ECU after the servo is removed.
I also found it to be a decent amount of weight removal which is good for this bike.
|
|
|
|
Post by mightypotatoe on May 12, 2018 7:46:25 GMT -6
Is it possible to just swap the plugs and leave the entire system installed? Would I get the same results? Just don't want to go through the hassle of removing it and want the option if I ever want to use it again
|
|
