|
Post by AshesOfAnother on Jun 28, 2017 8:34:37 GMT -6
Ha! I'm not a gentle rider myself. I am sorry you've had trouble with yours.
|
|
|
Post by ethereal on Jun 28, 2017 12:01:57 GMT -6
I if the blue loctite does not work I may put a small thin rubber washer between the ball and the mirror. Spending anther 5 cents is nothing considering what it has saved me, $150 for pretty much the same ones. fortnine.ca/en/crg-arrow-bar-end-mirror-black-ao-100
|
|
|
Post by ethereal on Jul 6, 2017 5:22:18 GMT -6
UPDATE: I had the glass from both mirrors fall out on me. I still think the above works well. Just be sure to add some extra glue to hold it in. They use a cheap clear approx that has the same consistency as hot glue. If you buy pop out the glass and use something that drys with more of a silicone/rubber cure.
|
|
|
Post by AshesOfAnother on Jul 6, 2017 9:21:29 GMT -6
Crazy! I have not had this issue either. Kinda sounds like you received a defective set, or you ride way harder than I do!
|
|
|
Post by ethereal on Jul 6, 2017 12:02:11 GMT -6
I am a very spirited rider. I even had the OEM ones moving on me. The blue loctite helped hold the mirror(a bit better), but I think that sent extra vibrations to the glass
|
|
|
Post by AshesOfAnother on Jul 6, 2017 13:11:40 GMT -6
You may have to invest in a rear view helmet 😂
|
|
|
Post by ethereal on Jul 7, 2017 5:22:30 GMT -6
I need the Iron mans helmet with Jarvis lol
|
|
|
Post by bubbagsxs750 on Jul 17, 2017 20:05:22 GMT -6
McMaster Carr, Fastenal, or Granger will all have what you need. Hey, what's the size of the smaller screws you changed that you wanted a little longer. Thanks!
|
|
|
Post by AshesOfAnother on Jul 17, 2017 21:38:49 GMT -6
I have no idea, they were the factory ones that came with the mirrors. I am out of town for the next three days and wish I could help, but I can't.
|
|
|
Post by david750 on Apr 3, 2018 22:24:26 GMT -6
Will it work with the regular screw that the mirrors come with?
|
|
|
Post by AshesOfAnother on Apr 4, 2018 4:25:33 GMT -6
Will it work with the regular screw that the mirrors come with? Nope, you'll need 6mm - 1.00 x 65mm hex caps. I'd suggest stainless steel as well.
|
|
|
Post by david750 on Apr 4, 2018 17:20:03 GMT -6
special ordered some screws if anyone wants some
Specs: 6mm - 1.00 x 65mm
just take care of shipping
|
|