|
Post by sstressfl on Jul 9, 2017 18:57:52 GMT -6
|
|
|
Post by prescottjay on Jul 15, 2017 11:07:05 GMT -6
I am going to look into these. Your video presentation is done very well. I like your work space. Very impressive all around
|
|
|
Post by sstressfl on Jul 18, 2017 8:22:31 GMT -6
prescottjay thanks man! I look fwd to hearing about your final solution.
|
|
|
Post by r3dster on Aug 16, 2017 9:49:33 GMT -6
This might be going to the opposite direction. Any members here tried the ultra low renthal bars? Its not available here. So i'll need to order them. I just need to know is it significantly lower compared to the standard bars or not. Thanks.
|
|
|
Post by prescottjay on Aug 29, 2017 12:43:39 GMT -6
prescottjay thanks man! I look fwd to hearing about your final solution. They just got these-SW-MOTECH 7/8" Barback Offset Handlebar Risers -back in stock and I ordered them. I have watched your video a couple of times and cannot wait to get these and put them on.
|
|
|
Post by prescottjay on Aug 31, 2017 22:09:15 GMT -6
prescottjay thanks man! I look fwd to hearing about your final solution. They just got these-SW-MOTECH 7/8" Barback Offset Handlebar Risers -back in stock and I ordered them. I have watched your video a couple of times and cannot wait to get these and put them on. Put them on and went for a 2 hr ride. Big improvement. It didnt all of a sudden turn it into a cruiser but definitely more comfortable than stock. I put them where it brought the bars back. Ill fiddle around with the handlebar position over the next few days to dial in the best position for me. But as is it was well worth the 102.00 spent. And the video you made was very helpful. It only took a few minutes to put on
|
|
|
Post by brutalcancroid on Sept 1, 2017 8:40:28 GMT -6
This might be going to the opposite direction. Any members here tried the ultra low renthal bars? Its not available here. So i'll need to order them. I just need to know is it significantly lower compared to the standard bars or not. Thanks. I've had ultra lows on other bikes and they're almost the same height as the standard ones. Just a lot wider.
|
|
|
Post by r3dster on Sept 2, 2017 1:09:44 GMT -6
This might be going to the opposite direction. Any members here tried the ultra low renthal bars? Its not available here. So i'll need to order them. I just need to know is it significantly lower compared to the standard bars or not. Thanks. I've had ultra lows on other bikes and they're almost the same height as the standard ones. Just a lot wider. Awesome! Thanks!
|
|
|
Post by custnam on Mar 24, 2018 3:30:55 GMT -6
I tried this with my 2018 and all the cables were fine except for the throttle cable. It would bind when turning to to the right. I tried to reroute it, but it still bound up. I have a perfect riser kit from Bikemaster if I decide to try again. All I would need is a longer throttle cable and I would be able to raise them an inch. I contacted motion pro but they dont have specs or a cable for the 2018 yet. So I would have to send in my cable, then pay over $100 for each cable for a custom. So I just kept it stock. I was coming from a 2017 SV650 so it just took awhile to get used to the different riding position. Im actually used to it now, so no real need for risers for now.
|
|
|
Post by sstressfl on Apr 11, 2018 8:35:35 GMT -6
They just got these-SW-MOTECH 7/8" Barback Offset Handlebar Risers -back in stock and I ordered them. I have watched your video a couple of times and cannot wait to get these and put them on. Put them on and went for a 2 hr ride. Big improvement. It didnt all of a sudden turn it into a cruiser but definitely more comfortable than stock. I put them where it brought the bars back. Ill fiddle around with the handlebar position over the next few days to dial in the best position for me. But as is it was well worth the 102.00 spent. And the video you made was very helpful. It only took a few minutes to put on That's awesome!! I like my bike so much better with them on. Such a subtle change, but its so comfy now.
|
|